Description Of The Washing Machine; Control Panel; Display - Ariston RPD 947 D Instructions For Use Manual

Table of Contents

Advertisement

Available languages

Available languages

Description of the washing machine

Control panel

GB
Detergent dispenser drawer
Detergent dispenser drawer: used to dispense
detergents and washing additives (see "Detergents and
laundry").
Programme Key: the Programme Key inside the deter-
gent dispenser shows all the available programmes toge-
ther with a graphical guide on how to use the individual
dispenser compartments.
ON/OFF button
chine on or off. The START/PAUSE indicator light, which
flashes slowly in a green colour shows that the machine is
switched on. To switch off the washing machine during the
wash cycle, press and hold the button for approximately 3
seconds; if the button is pressed briefly or accidentally the
machine will not switch off. If the machine is switched off
during a wash cycle, this wash cycle will be cancelled.
WASH CYCLE SELECTOR KNOB: used to set the
desired wash cycle (see "Table of programmes and wash
cycles").
FUNCTION buttons: press the button to select the
desired function. The corresponding indicator light on the
display will switch on.
AUTO CLEAN button: press to clean the machine's inter-
nal parts (see "Cleaning the washing machine").
DIRECT INJECTION button: press to select the DIRECT
INJECTION option.
MULTI RINSE button
rinse type.
SPIN button
: press to reduce or completely exclude
the spin cycle - the value is indicated on the display.
TEMPERATURE button : press to decrease the tempe-
rature: the value will be shown on the display.
KEY LOCK button
lock, press and hold the button for approximately 2
seconds. When the display visualises "KEY LOCK ON" the
18
ON/OFF
Programme
Key
: press this briefly to switch the ma-
: press to select the desired
: to activate the control panel
button
AUTO
CLEAN
button
WASH
CYCLE
TEMPERATURE
SELECTOR
KNOB
control panel is locked (apart from the ON/OFF button).
This means it is possible to prevent wash cycles from
being modified accidentally, especially where there are
children in the home. To deactivate the control panel lock,
press and hold the button for approximately 2 seconds.
DELAY TIMER button
time for the selected wash cycle. The delay time will be
shown on the display.
START/PAUSE button with indicator light: when the gre-
en indicator light flashes slowly, press the button to start a
wash cycle. Once the cycle has started the indicator light
will remain lit in a fixed manner. To pause the wash cycle,
press the button again; the indicator light will flash in an
orange colour. If the symbol
may be opened. To start the wash cycle from the point at
which it was interrupted, press the button again.
Standby mode
This washing machine, in compliance with new energy sa-
ving regulations, is fitted with an automatic standby system
which is enabled after about 30 minutes if no activity is
detected. Press the ON-OFF button briefly and wait for the
machine to start up again.
Antimicrobial seal
The seal around the porthole door is made from a special
mixture ensuring antimicrobial protection, thus reducing
bacterial proliferation up to 99.99%.
The seal contains zinc pyrithione, a biocidal substance
which reduces the proliferation of harmful microbes (*)
such as batteries and mould prone to causing stains,
unpleasant odours and product deterioration.
(*) According to tests performed by the University of Perugia,
Italy on: Staphylococcus aureus, Escherichia coll, Pseudomonas
aeruginosa, Candida albicans, Aspergillus niger, Penicillium digitatum.
In rare cases an allergic reaction may be caused by prolonged contact between
seal and skin.
MULTI
RINSE
FUNCTION
button
buttons

DISPLAY

KEY LOCK
button
DELAY
TIMER
button
button
SPIN
button
: press to set a delayed start
is not illuminated, the door
DIRECT
INJECTION
button
START/PAUSE
button with indicator light

Advertisement

Chapters

Table of Contents
loading

Table of Contents