Weekly Timer - Mitsubishi Electric PAR-30MAAU Instruction Book

Controller operation-Function settings

Weekly timer

Button operation
1
Main
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Main display: RETURN
Cursor
F1
MENU RETURN
2
Sun Mon
No.
Setting display: SELECT
day
F1
MENU RETURN
3
Weekly timer No /
Select: SELECT
F1
MENU RETURN
32
Main menu
Page
F2 F3 F4
ON
SELECT HOLD
OFF
Weekly timer
Tue Wed Thu Fri Sat
F
F
F
F
Page
F2 F3 F4
ON
SELECT HOLD
OFF
Weekly timer
Yes
Cursor
F2 F3 F4
ON
SELECT HOLD
OFF
Select "Weekly timer" from the Main menu (refer
to page 22), and press the SELECT button.
The Weekly timer will not work in the following cases:
when the On/Off timer is enabled, when the weekly timer
is disabled, during an error, during check (in the service
menu), during test run, during remote controller diagnosis,
when the clock is not set, during Function setting, when
the system is centrally controlled (On/Off operation or
temperature setting from local controller is prohibited),
when the Hold function is enabled.
When the scheduled timer for the preset temperature
is executed during the Setback mode, the Setback
operation will be cancelled, and the unit will return
to the previous operation mode before the Setback
operation has started.
The current settings will appear.
Press the F1 or F2 button to see the settings
for each day of the week.
Press the F4 button to see patterns 5 through 8.
Press the SELECT button to go to the setting
screen.
The screen to enable (Yes) and disable (No) the
weekly timer will appear.
To enable the setting, move the cursor to "Yes"
with the F3 or F4 button, and press the
SELECT button.
P