Mitsubishi Electric PAR-30MAAU Instruction Book page 43

4
Energy saving
Sun Mon Tue Wed Thu Fri Sat
No.
Input: SELECT
day
F1 F2
MENU RETURN
5
Energy saving
Mon
No.
Select: SELECT
Cursor
F1 F2
MENU RETURN
Energy saving
Mon
Changes saved
Day selection: SELECT
Room
Cool
Mode
-
-
-
-
Select
F3 F4
ON
SELECT HOLD
OFF
-
-
-
-
Content
F3 F4
ON
SELECT HOLD
OFF
Fri
Auto
Set temp.
Temp. Fan
The setting change/day of the week selection
screen will appear.
Up to four operation patterns can be set for each
day.
Move the cursor to the desired day of the week
with the F1 or F2 button, and press the
F3 button to select it. (Multiple days can be
selected.)
Press the SELECT button to go to the pattern
setting screen.
The pattern setting screen will appear.
Press the F1 button to move the cursor to the
desired pattern number.
Move the cursor to the desired item with the
F2 button out of the start time, stop time, and
energy-saving rate (arranged in this order from
the left).
Change the settings with the F3 or F4 button.
Start/Stop time: settable in 5-minute increments
•
* Press and hold the button to rapidly advance
the numbers.
Energy-saving rate: The setting range is 0%
•
and 50 to 90% in 10% increments.
Press the SELECT button to save the settings.
A confirmation screen will appear.
The lower the value, the greater the energy-saving effect.
will appear on the Main display in the Full
mode when the unit is operated in the energy
saving mode.
Navigating through the screens
• To go back to the setting change/day of the week
selection screen ............................. SELECT button
• To go back to the Main menu .......... MENU button
• To return to the previous screen ...... RETURN button
43