Mitsubishi Electric PAR-30MAAU Instruction Book page 9

1Operation mode
Indoor unit operation mode appears here.
2Preset temperature
Preset temperature appears here.
3Clock
(See the Initial Setting Manual.)
Current time appears here.
4Fan speed
Fan speed setting appears here.
5Button function guide
Functions of the corresponding buttons appear
here.
6
Appears when the ON/OFF operation is centrally
controlled.
7
Appears when the operation mode is centrally
controlled.
8
Appears when the preset temperature is centrally
controlled.
9
Appears when the filter reset function is centrally
controlled.
0
Indicates when filter needs maintenance.
aRoom temperature
(See the Initial Setting Manual.)
Current room temperature appears here.
b
Appears when the buttons are locked.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Menu
screen. (Refer to page 22.)
c
Page 14
Appears when the On/Off timer is enabled.
Page 16
d
Appears when the Weekly timer is enabled.
e
Appears while the units are operated in the
Page 18
energy-save mode.
f
Appears while the outdoor units are operated in
the silent mode.
g
Appears when the built-in thermistor on the
remote controller is activated to monitor the
room temperature (a).
indoor unit is activated to monitor the room
temperature.
h
Indicates the vane setting.
i
Indicates the louver setting.
j
Page 50
Indicates the ventilation setting.
k
Appears when the preset temperature range is
restricted.
l
Page 38
Appears when the Hold function is enabled.
appears when the Hold function is enabled.
appears when the thermistor on the
Page 29
Page 32
Page 40
Page 34
Page 24
Page 25
Page 25
Page 36
Page 19
9