Table of Contents
Advertisement
OT Bioelettronica snc
1. GENERAL DESCRIPTION
The Forza is single channel general purpose amplifier. This system has been designed to
amplify and to filter any differential single ended signals.
The information detected from the input are conditioned and then transferred to a PC with
a wired connection (USB) or with a wireless connection (Bluetooth), or available in analog
modality on the output connector.
Forza connected to a PC via USB:
Forza works with a software named OT BioLab in order to display and process the data.
This software is part of the Forza system and it is also possible to download it for free on
the website
www.otbioelettronica.it
Forza connected to a Tablet or Smartphone via Bluetooth:
Forza works with an App called Forza (downloadable on the playstore), with this App is
possible to display acquired data.
Forza in analog mode:
Forza can be connected to other devices (eg. To the AUX-IN connector of the devices:
EMG-USB2+, EMG-USB e MEBA) or it can be connected to a standard acquisition board
or to an oscilloscope.
2.
INTENDED USE
Forza has been designed to be used as a force measurement device for signal produced
by load cells or torque-meters with differential output.
The device is not intended to be used near inflammable anaesthetics.
3.
PLACE OF USE
Forza is intended to be used primarily as a laboratory device and secondly as a hospital
device: as a home device, the patient uses the device at home during the day and as a
hospital device the operator uses the information detected from it in order to make a
diagnosis.
v1.0 – Ed. 05/2015
User Manual
in the Downloads section.
Pag. 7/19
Advertisement
Table of Contents
