Deck Housing; Securing Nuts And Bolts; Clutch Cable Adjustment - Hayter HARRIER 41 Owner's Handbook Manual

Hide thumbs Also See for HARRIER 41:
Table of Contents

Advertisement

MOWER MAINTENANCE

Deck Housing

Securing Nuts & Bolts
1CG480V36B

Clutch Cable Adjustment

55-70mm
(412)
1
2
(411)
1
1.22
Remove grass debris from the top and underside of the deck housing
immediately after use.
Fertilisers and top dressings are particularly corrosive.
Thoroughly clean the mower deck immediately after use on treat-
ed grass and store well away from corrosive materials.
Regularly check that all securing nuts and bolts are tight. Replace
missing or damaged items immediately.
Check the clutch cable operation after the first hour and then every 25
operating hours and adjust if necessary. The clutch cable is adjusted
correctly when the drive engages with the clutch lever positioned 55-
70mm from the handlebar.
(412 Only)
Unscrew the lock nuts and screw the adjuster in or out as necessary.
Tighten the locknuts when correctly adjusted.
(410/411 Only)
Set the plastic adjuster (1) as necessary.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Harrier 41

Table of Contents