Max ER-2500 Instruction Manual page 12

The Contents of Setting Item
[Machine Mode1]
[Machine Mode2]
[Pay Closing Date]
[60 or 100 scale]
[Daily Total Hours]
Setting data
◆ After pressing "SET" key, all changed data in each mode are registered and the display re-
turns to the start of setting mode(
◆ Alternatively, you can press "
data, and then the display returns to the start of setting mode.
1. When selecting "3(Without Daily Total Hours function)" in Machine Mode 1
setting (CODE 01 in MODE 1) or using ER-2500E, Daily Total Hours setting
(CODE 05 in MODE1) is not displayed.
2. When setting no Special Day in Special Day setting (CODE 02 in MODE 3),
"CODE 11" to "CODE 17" are not displayed.
[Year]
[Month, Date]
[Hour, Minute]
Code No.
( FORWARD)" key in last setting item to register all changed
[Holiday]
[Special Day]
[LST]
[OUT3]
[OST]
[IN1 for Special Day]
[OST for Special Day]
[Starting Date of Day Light Saving Time]
[Ending Date of Day Light Saving Time]
symbol appears on the display.).
- 10 -
[IN1]
[Melody]
[Time Signal 1]
[Time Signal 22]