HOW TO SET UP
KEY-CARD
"Key-Card" must be used to set or change any data.
Operation
1.
Insert "Key-Card."
indicate the starting of setting mode.
2.
After setting or changing data, insert "Key-Card" again.
symbol disappears.
Keep "Key-Card" in a safe place to prevent it from
being damaged, lost or used by an unauthorized
person.
If you do not touch any keys for 60 seconds,
BASIC OPERATION OF SETTING OR CHANGING DATA
Operation
1.
Insert "Key-Card."
2.
Press "MODE 1," "MODE 2," "MODE 3" or "OPTION" key to select setting mode.
Then first setting item (CODE 01) is displayed.
( BACKWAR)" or "
3.
Press "
4.
Press "
( INCREASE)" or "
blinks.)
5.
If the changed data is OK, press "
next setting item.
6.
Press "SET" key to register all changed data and to return the start of setting mode. Al-
ternatively, you can press "
data and to return to the start of setting mode.
By pressing "CANCEL" key during setting, you can return to the start of setting
mode without registration.
symbol appears on the display to
symbol disappears automatically.
( FORWARD)" key to select setting item.
(DECREASE)" key to change data. (The changeable data
( FORWARD)" key in last setting item to register all changed
( BACKWARD)" or "
- 9 -
( FORWARD)" key to move to