How To Operate - Max ER-2500 Instruction Manual

HOW TO OPERATE

1. AUTOMATIC OPERATION
Column to be printed is shifted automatically in the order of IN1, OUT1, IN2, OUT2, IN3 and
OUT3 without pressing any external keys.
1. Insert time card to the position where automatic feed starts.
2. Time card will be ejected automatically after printing the time.
2. MANUAL OPERATION
ER-2500 allows manual operation to select a desired column to be printed on.
1. Select a desired column to print by pressing "IN1," "OUT1," "IN2,"
"OUT2," "IN3" or "OUT3" key.
2. symbol appears at the selected column on the display.
3. Insert time card to the position where automatic feed starts.
4. Time card will be ejected automatically after printing the time.
1. Do not keep holding the time card during printing.
2. Do not pull or push time card with your hand.
3. Do not cover any of small holes at both edges on time card.
1. If "E-01" appears on the display, the time card has been inserted
incorrectly.
2. When using Daily Total Hours function, ER-2500 automatically prints
Daily Total Hours in the 5
Hours in the 6
Install this instrument on a level place.
Do not install on or near a place subject to vibration.
th
column after printing the time in the 4
CAUTION
th
column and Accumulation of Daily Total
- 8 -
(See [14] on page 24)
th
column.