Replace The Tact Filter Cleaning System - Kärcher NT 40/1 Tact Service Manual

5.2 Replace the Tact filter cleaning system


Remove the top part of the Tact casing.
1 Tact filter cleaning system
2 Connecting cable, electro-magnet
3 Fastening screws

Remove the fastening screws from the Tact filter
cleaning system.

Pull the electro-magnet out of the Tact filter clean-
ing system toward the top.
1 Connecting cable, electro-magnet
2 Electric solenoid
3 Fastening screws
4 Magnet-holder
5 Seal ring
6 Valve disks
7 Spring, large
8 Spring, small
English 5.906-513.0 Rev. 00 (12/10)
11