Table of Contents
Advertisement
10 Fine dust
11 Dirt receptacle
When vacuuming larger volumes of fine dust, the flat
fold filter plugs up fast. When the Tact filter cleaning
system is turned on, the electro-magnet opens the di-
aphragm every 15 seconds, so that an air flow can
clean off the flat fold filter via sudden pressure revers-
al.
It is recommended to switch off the Tact filter cleaning
system while vacuuming coarse dirt and liquids.
Note
The Tact filter cleaning system can only be switched
on/off when the vacuum is switched on.
4.6 Suction head, filter cover opened
1 Flat fold filter
2 Air input, left
3 Filter cover
4 Handle on the filter cover
5 Casing, Tact filter cleaning system
6 Air input, right
Note
For wet and dry vacuuming, the flat fold filter must al-
ways be installed.
After the wet vacuuming has ended, the flat fold filter
must be dried.
To vacuum fine dust, you must use an additional pa-
per filter bag or a membrane filter (special accesso-
ry). These must always be removed prior to wet
vacuuming.
8
English 5.906-513.0 Rev. 00 (12/10)
4.7 Suction system
1 Suction turbine
2 Air input
3 Coarse dirt
4 Fine dust
5 Dirt receptacle
6 Air outlet
7 Flat fold filter
8 Tact filter cleaning system
The air flows from the air input through the waste con-
tainer and flat fold filter via the suction turbine to the
exterior.
Advertisement
Table of Contents
