Replacing exhaust filter
Recommendation: In order to ensure good filtration,
replace the exhaust filter once a year.
Remove the exhaust filter cover upwards at an an-
gle along the edge of the device.
Press the exhaust filter together on both sides and
Attach a new exhaust filter and lock in place.
Place the exhaust filter cover on the edge of the ap-
pliance, push it downwards and lock in place.
Reduced suction performance can be caused by:
Blockage in accessories: Remove the blockage
carefully with a narrow tool.
Blockage in telescopic suction pipe: Lever the cov-
er on the handle off with a screwdriver and then re-
move the blockage carefully with a narrow tool.
Check to see whether the filters are intact or dam-
See chapter "Care and Maintenance".
Mains fuse (slow-blow)
Weight (without accessories)
Device with floor nozzle
(Device in parking position)
Nominal width, accessories
Eco design as per 666/2013
Energy efficiency category
Indicative annual energy
Carpet cleaning class
Hard floor cleaning class
Dust emission class
Sound power level L
Rated power input
Subject to technical modifications!
220 - 240
ø 182 x
261 x 621
KÄRCHER Pty. Ltd.
40 Koornang Road
Scoresby, Victoria 3179
1800 675 714 (Free Call)
66 Allens Road,
East Tamaki, Aukland