Dialling With The Directory; Using The Redial List - Gigaset a400 Manual

Using the directory and lists
Directory
To open the directory: press and hold the bottom
s
control key .
You can save up to 80 phone numbers (max. 32 digits)
with corresponding names (max. 16 characters).
Enter letters/characters ¢ page 11.
Saving the first number in the directory
s
¤ New Entry? ¤ OK
~
¤ ¤ OK
Enter number)
(
~
¤ ¤ OK
Enter name)
(
Saving a number in the directory
s
¤ Menu ¤ New Entry ¤ OK
~
¤ ¤ OK
Enter number)
(
~
¤ ¤ OK
( Enter name)
Selecting a directory entry
Open the directory with
options:
s
u Use
to scroll through the entries until the
required name is selected.
u Enter the first character of the name, if necessary
scroll to the entry with the

Dialling with the directory

s q
¤ (Select entry) ¤
Using other functions
s q
¤ (Select entry) ¤ Menu
The following functions can be selected with
New Entry Save new phone number.
Show Number Display the phone number.
Show Name Display name.
Edit selected entry.
Edit Entry
Use Number Edit or add to the number.
Then dial or select other
functions from the
Delete Entry Delete selected entry.
Send Entry Send a single entry to another
handset (¢ page 8).
Delete List Delete all directory entries.
Send List Send the complete directory to
another handset (¢ page 8).
Shortcut For speed dial, assign the current
entry to a key.
s
. You have the following
s
key.
c
s
.
Menu
8
Using speed dial keys
You can assign directory entries to the keys 0 and 2-9:
s q
¤ (Select entry) ¤ Menu
¤ Shortcut ¤ OK ¤
to assign the entry)
To dial, press and hold the required speed dial key.
Transferring the directory to another handset
Prerequisites:
u The sending and receiving handsets must both be
registered to the same base.
u The other handset and the base can send and
receive directory entries.
s q
¤ (Select entry) ¤ Menu
¤ Send Entry / Send List ¤ OK ¤
number of the receiving handset) ¤ OK

Using the redial list

This list contains the last ten numbers dialled.
Dialling from the redial list
Þ c
Press or
Managing entries in the redial list
Þ c
Press or
You can select the following settings:
Use Number
Copy to Dir.
:
Delete Entry
Delete List
Call List/Network Mailbox List
An advisory tone sounds as soon as a new message
arrives in a list. You can select whether you also want
a message to appear on the display or the message
f
key to flash:
P#Q5#M
Menu ¤
5
X = for missed calls
M
for messages on the answering machine
Q
Y= visual signal activated (default setting)
1
visual signal deactivated
Settings will only be changed once a new message
has been received.
~
(Press the key to which you want
~
(Enter the internal
q
(briefly) ¤ (Select entry) ¤
q
(briefly) ¤ (Select entry) ¤ Menu
Edit or add to the number. Then
dial or select other functions from
the .
Menu
Copy an entry to the directory.
Delete selected entry.
Delete all entries.
¤ XY ¤ OK
c