Set Time; Set Calendar; City Selection: Sunrise/Sunset Times - La Crosse Technology 308-1451H Instruction Manual

Set Time

To set the time manually:
1. The hour digit will flash.
2. Press and release the + or - button to select the hour.
3. Press and release the SET button to move to the minutes.
4. The minute's digit will flash.
5. Press and release the + or - button to set the minutes.
6. Press and release the SET button to move to the seconds.
7. The second's digit will flash.
8. Press and release the + or - button to reset the seconds to zero.
9. Confirm with the SET button and move to Set Calendar.

Set Calendar

To set the calendar:
1. The year will flash.
2. Press and release the + or - button to set the year (between year 2010-2039).
3. Press the SET button again to confirm and to enter the month setting.
4. The month will flash.
5. Press and release the + or - button to set the month.
6. Press the SET button again to confirm and enter the date setting.
7. The date will flash.
8. Press and release the + or - button to set the date.
9. Confirm all calendar settings with the SET button to confirm and exit the program menu.
Note: If no buttons are pressed for 20 seconds, set mode will time out and return to live display mode, reflecting
whatever adjustments were made before it timed out.
Note: Press the + or - button once to adjust by 1 unit or hold for fast scroll adjustment.
City Selection: Sun rise/set Times
Note: Preset city abbreviations are at the end of this
manual.
Choose the city closest to you in a north/south direction.
This will provide the most accurate sunrise/sunset times.
CITY
To select a city location: Select your country, state, and then city location.
1. Hold the CITY button for 5 seconds.
2. USA will flash next to the sunrise/sunset time.
USA
3. Press and release the + or - button to select USA, CAN or MEX as your country.
4. Press the CITY button to confirm the country and select a state.
Note: When either Canada or Mexico is chosen, you will move directly to city selection.
AK
5. The state will flash. Press and release the + or - button to select a state.
6. Press the CITY button to confirm the state and select a city.
7. The city location will flash.
8. Press and release the + or - button to select a city from the list at the end of this manual.
ANC
9. Press the CITY button to confirm and exit.
After a short calculation time, the forecast station shows the times for sunrise and sunset, moon
phase and lunar tide.
Note: When DST is in affect the forecast station will need to receive the WWVB time signal to make the
adjustment for DST. The WWVB signal includes an embedded bit to tell the station to adjust for DST. Until that
signal is received the first time, the sunrise/sunset times will be one hour off.
5
Model: 308-1451H www.lacrossetechnology.com/support