Features; Install Batteries In The Forecast Station & Sensor; Function Buttons; Set Temperature Alarms 2 And - La Crosse Technology 308-1451H Instruction Manual

Features


Forecast icons change with barometric pressure (Snow, Sun, Partial Sun, Clouds and Rain)

Advanced Hunter icon reacts to changes in outdoor temperature

Barometric pressure with 12 hour history graph (InHg or hPa)

Atomic 12/24 hour time and calendar: day, month, date (manual set option)

Sun rise/set, moon phase for 250 pre-selected US cities

Indoor temperature (ºF/ºC)

Indoor humidity (%RH)

Outdoor temperature (ºF/ºC)

Outdoor humidity (%RH)

Temperature and frost alarm icons

Time alarm with snooze

Indoor comfort level icon

Temperature and humidity trend arrows

Blue LED backlight

Low battery indicators

Monitor up to 3 separate sensors (sold separately)
Install Batteries in the Forecast Station & TX142TH Sensor
Forecast Station:
1. Remove battery cover. Slide tab to the right and pull out to remove battery
cover.
2. Install three new AA batteries according to the polarity
markings.

Do Not Mix Old and New Batteries

Do Not Mix Alkaline, Lithium, Standard or Rechargeable
Batteries
Outdoor Sensor:
1. Slide the battery cover down, then lift off the front of the TX142TH sensor.
Note: Be careful not to break the tabs on the battery cover.
2. Confirm the channel selector switch is on channel 1.
3. Insert two new AA batteries into the sensor.
Observe the correct polarity (see marking inside battery compartment).
4. Keep sensor 5-10 ft. from the forecast station during setup.
5. After 15 minutes, if the outdoor temperature shows on the forecast station, move the
outdoor sensor outside to a shaded location within range of the forecast station.
Function Buttons (on back of forecast station)
Model: 308-1451H www.lacrossetechnology.com/support
3