Table of Contents
Advertisement
5.2 Safety instructions
Heat production during appliance
operation
Risk of fire
• Check that the piece of furniture material
is heat resistant.
• Check that the piece of furniture has the
required slots.
Veneers, adhesives or plastic coatings on
adjacent furniture should be temperature-
resistant (>90°C), otherwise they might
warp over time.
The minimum distance between a ventilation
hood and the cooking surface must be at
least the distance indicated in the ventilation
hood installation instructions.
The minimum distances must also be
respected for the edges of the hob on the
back as indicated in the mounting
illustrations.
5.3 Section cut from the work surface
The following operation requires
building and/or carpentry work
and must therefore be carried out
by a competent tradesman.
Installation can be carried out on
various materials such as masonry,
metal, solid wood or plastic
laminated wood as long as they
are heat resistant (>90°C).
Create an opening with the dimensions
shown in the figure in the work surface of
the piece of furniture.
Installation
Hobs without a frame
L (mm)
300
600
770
900
Hobs with a frame
L (mm)
570
760
A (mm)
min 50
X (mm)
270
565
745
850
X (mm)
560
750
B (mm)
C (mm)
D (mm)
min 460 min 750 20÷60
Y (mm)
490
490
490
490
Y (mm)
500
500
E (mm)
min 50
47
Advertisement
Table of Contents
