Mounting - Smeg SE2641TD2 Instructions Manual

Hide thumbs Also See for SE2641TD2:
Table of Contents

Advertisement

5.4 Mounting

Over built-in oven
The distance between the hob and the
kitchen furniture or other installed
appliances must be enough to ensure
sufficient ventilation and air discharge.
If installed above an oven, a space must be
left between the hob and the top of the
appliance installed below.
opens on bottom
opens on bottom and on rear
If installed on top of an oven, the
latter must be equipped with a
cooling fan.
48
Installation
Over empty kitchen unit or drawers
If there are other pieces of furniture (lateral
walls, drawers, etc.), dishwashers or fridges
under the hob, a double-layer wooden
base must be installed at least 20 mm from
the bottom of the hob to avoid any
accidental contact. It must only be possible
to remove the double-layer base using
suitable equipment.
opens on bottom
opens on rear
Failure to install the double-layer
wooden base exposes the user to
possible accidental contact with
sharp or hot parts.

Advertisement

Table of Contents
loading

Table of Contents