JVC VN-H37U SERIES Instructions Manual page 12

No. Item
Alarm Settings
⑤
Trigger1
Interval
(VN-H57U/H2
57U/H257VP
U/H157WPU
only)
Select the 1st trigger to start alarm recording.
When using VN-H57U/H257VPU/H157WPU
[Set values： Pin Input1 Make, Pin Input1 Break, Pin Input2 Make,
Pin Input2 Break, Audio Detection1, Audio Detection2, Position,
Motion Detection, Tampering Detection, Day/Night, Time]
When using VN-H37U/H137U/H237U
[Set values： Position, Motion Detection, Tampering Detection, Time, Day/Night
(VN-H37U only)]
Memo:
The "Motion Detection", "Audio Detection1", "Audio Detection2", or "Tampering
Detection" trigger for [Trigger1] must first be set to "ON" in the respective
[Advanced Settings] configuration page.
If you set the [Trigger2] to "Disable", an alarm recording will be performed
when only [Trigger1] is triggered. (VN-H57U/H257U/H257VPU/H157WPU
only)
When "Audio Detection1",
"Position" "Tampering Detection", "Day/Night", or "Time" is selected for the
[Trigger1] trigger, [Interval] and [Trigger2] cannot be selected. (VN-H57U/
H257U/H257VPU/H157WPU only)
This is available when both [Trigger1] and [Trigger2] are set.
Specify the maximum interval between each trigger for [Trigger1] and [Trigger2].
An alarm recording will be performed if [Trigger2] occurs within the maximum
time interval after [Trigger1] occurs.
[Set values：1 – 3600 ] sec
Memo:
If you set an invalid value, the "Invalid value" dialog is displayed.
If you leave a value blank, the "Blank value" dialog is displayed.
Description
"Audio Detection2",
* The [Set values] in bold letters are factory defaults
12
"Motion Detection",