Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for W Audio DMA 200
Summary of Contents for W Audio DMA 200
- Page 1 DMA 200 Mixer Amplifier with MP3 Player User Manual Order code: AMP60...
-
Page 2: Safety Advice
NO USER SERVICEABLE PARTS. pulling the power-cable. • This fixture is for professional use only - it is not designed • Make sure that the available mains supply voltage is for or suitable for household use. The product must be between 110~240V AC, 50/60Hz. installed by a qualified technician in accordance with local territory regulations. The safety of the installation is the • Make sure that the power cable is never crimped or responsibility of the installer. The fixture presents risks of damaged. Check the equipment and the power cable severe injury or death due to fire hazards, electric shock periodically. and falls. • If the equipment is dropped or damaged, disconnect the • WARRANTY: One year from date of purchase. mains power supply immediately and have a qualified engineer inspect the equipment before operating again. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. In case of malfunction this unit should be returned for service or inspection. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. www.prolight.co.uk DMA 200 Mixer Amplifier User Manual... - Page 3 Product overview & technical specifications DMA 200 Mixer Amplifier with MP3 Player The DMA 200 is a 4 channel 2 x 100W mixer amplifier with a built in media player for playback of MP3 audio files from the SD/USB card slots. When coupled with a pair of speakers, the DMA will be ideal for rehearsal rooms, small to medium live music gigs, small school halls or presentations. • 4 input channels plus onboard MP3 player (SD and USB) • 2 band EQ on each input channel • 3 band EQ on main output • MP3/CD line input on rear • 1/4” jack line input and output on rear • Function buttons with LCD display • IEC power input • Rugged housing with protective Specifications DMA 200 corners and carry handle Continuous power (RMS) 2 x 75W • Fan cooled Peak power 2 x 100W Frequency range (-3dB) 20Hz - 20kHz Inputs: 4 x balanced XLR microphone inputs, 3 x unbalanced 1/4” jack inputs, phono input, CD/MP3 input Connectors Outputs: Record output, 2 x 1/4” jack speaker outputs (4Ω) 1/4” jack input/output on rear (this disables speaker output)
-
Page 4: Technical Specifications
D - Volume decrease input source. If stereo is required it would need to be E - Track skip backwards (holding this button will scan spread across 2 seperate channels, e.g. plug the left the track in reverse) signal into channel one and the right signal into F - Track skip forwards (holding this button will scan the channel 2. Only use mono jacks.) track forward) 07 - Line input - This dual input is for RCA type connectors for G - Repeat - Pressing this button once will repeat a single stereo line level devices. You can use both the Mic and track. Press again to repeat all the tracks on the USB or Line inputs simultaneously on Channel 4. SD card once all the tracks have been played once. 08 - EQ - The signal from the input channels, processed by H - EQ - This button has 8 steps. Each step has a the built-in three band equaliser feeds to the master different preset of EQ level. Pressing the button once output. There are three knobs here to control the will move the function forward one step. The display equalisation. Treble - This adjusts the high frequency will show E1-E8. This EQ only affects the song on the range of the sound. Middle - This adjusts the middle USB or SD card inputs. range of the sound. Bass - This adjusts the low frequency I - USB/SD input selector range of the sound. 15 - USB input 09 - CD/MP3 IN - This control adjusts the master volume 16 - SD card slot of the line level input. This connection is an RCA type connector and is located on the rear panel (see 23). www.prolight.co.uk DMA 200 Mixer Amplifier User Manual... -
Page 5: Rear Panel
Input channel High EQ ±15dB @ 12kHz Low EQ ±15dB @ 80Hz Digital delay time (ms) 140-342ms Total harmonic distortion (THD) <1% @ 20Hz - 20kHz into 4Ω load Digital media player inputs USB and SD Audio formats MP3 and WMA Continuous power output 2 x 75W RMS @ 4Ω Maximum power output 2 x 100W peak @ 4Ω www.prolight.co.uk DMA 200 Mixer Amplifier User Manual... -
Page 6: Operating Instructions
CAUTION! - DANGER TO LIFE DISCONNECT FROM THE MAINS BEFORE STARTING MAINTENANCE OPERATION Cleaning and Maintenance We recommend a frequent cleaning of the product. Please use a soft lint free and moistened cloth. Never use alcohol or solvents. There are no serviceable parts inside the product except for the fuse. Maintenance and service operations are only to be carried out by authorised dealers. Replacing the fuse Only replace the fuse with a fuse of the same type and rating. Before replacing the fuse, unplug the mains cable. Procedure: Step 1: Open fuse holder on the rear panel with a screwdriver. Step 2: Remove the old fuse from the fuse holder. Step 3: Install the new fuse in the fuse holder. Step 4: Replace the fuse holder in the housing. Should you need any spare parts, please use genuine parts. Should you have any further questions, please contact your dealer. www.prolight.co.uk DMA 200 Mixer Amplifier User Manual... -
Page 7: Weee Notice
WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk DMA 200 Mixer Amplifier User Manual... - Page 8 DMA 200 Mixer Amplifier User Manual...