Table of Contents
Advertisement
Symptom
There is no sound or the sound is
D
distorted.
V
D
There is no picture.
Picture noise appears.
V
C
The cassette tape does not play back. • No cassette tape is inserted.
R
Recording does not start after you
press [REC I].
The remote control does not function. • Check if a cassette tape is in this unit.
The motor rotates even when
playback / recording is stopped.
Frequently Asked Questions
– Can I record to CD-RW/-R?
– Can I play back DVD-video that is bought in another
country?
– Can I connect the unit to my PC?
– Can I program a timer recording with external tuner?
– Can I record one channel while watching another
channel using an external tuner?
– Can I change the channels on the external tuner using
the remote control of this unit?
Downloaded from
www.Manualslib.com
TROUBLESHOOTING
Remedy
• The HDMI sound is not output when "HDMI Audio" is set to "OFF".
• Check the RCA audio cable connection. If you are using HDMI-DVI
conversion cable, you must connect the RCA audio cable, too.
• Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
• If you connect the cable to S-VIDEO OUT/ COMPONENT VIDEO OUT /
HDMI OUT jack, try connecting it to AUDIO / VIDEO OUT jack instead.
• Head cleaning for VCR may be necessary. Refer to "Auto head cleaning"
(page 5).
• Adjust tracking control for better picture by pressing [TRACKING
while you are playing back a cassette tape.
• Make sure the cassette tape has a erase-protection tab when you record
to a cassette tape. If needed, cover the hole with cellophane tape.
• The motor may rotate for the duration of approximately 5 minutes for
efficient operation. This is not a malfunction.
manuals search engine
No, this unit records only DVD.
Possible when the region code of the disc is 1 and All.
No, you cannot control the unit by PC.
Yes, you can. Select "E1" or "E2" as your recording
channel, and leave the external tuner on (pages 13, 28-
31).
It depends on your connection configurations. For more
details, please kindly contact at your local store.
No. Changing the channels on the external tuner using
this unit's remote control is not possible. You need to use
the remote control supplied with the external tuner to
change the channels on the external tuner.
/
]
EN
EN
83
83
Advertisement
Table of Contents
