Table of Contents
Advertisement
Index Search
An index mark will be assigned at the beginning of each
recording you make. You may skip to a specific marked
point by following the steps below.
Press [VCR] first.
1) Press [SEARCH] so that "INDEX SEARCH" menu
appears.
2) Using [the Number buttons], enter the number of
recordings you wish to skip within 30 seconds.
3) Press [E], [D] to start index search.
If you want to go in the forward direction, press [ D].
If you want to go in the reverse direction, press [E].
After index search, the VCR will play back the cassette
tape automatically.
Beginning
of tape
02
Note
• You can make the index mark up to 20.
Time Search
This feature allows you to go to a specific point on a
cassette tape by entering the exact amount of time you
wish to skip in order to reach the point.
Press [VCR] first.
1) Press [SEARCH] repeatedly so that "TIME SEARCH"
menu appears.
2) Using [the Number buttons], enter your desired
time to skip within 30 seconds.
You can set the time up to 9:59.
3) Press [E], [D] to start time search.
If you want to go in the forward direction, press [D].
If you want to go in the reverse direction, press [E].
After time search, the unit will play back the cassette
tape automatically.
Note
• Index search and time search are not available
during recording.
• Press [STOP C] to stop the search.
• If the end of the cassette tape is reached during
search, this unit will cancel the search and rewind the
cassette tape.
80
EN
Downloaded from
www.Manualslib.com
INDEX SEARCH
03
CURRENT PROGRAM
Pro.1
Pro.2
Pro.3
Pro.4
Pro.5
01
01
02
03
INDEX MARK
TIME SEARCH
2:50
manuals search engine
VCR FUNCTIONS
Other Operations
Press [VCR] first.
Fast forward:
When the unit is in stop mode, press [D] to fast forward
the cassette tape.
Rewind:
When the unit is in stop mode, press [E] to rewind the
cassette tape.
To cue or review picture during playback (picture search):
Press [E], [D] during playback.
Press it again and the unit will search in super high
speed. (in the SLP mode only)
To freeze the picture on TV screen during playback
(still mode):
Press [PAUSE F]. Each time you press the button, the
picture will be forwarded by one frame.
If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing [TRACKING
End
of tape
on remote control.
If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV, if equipped.
Counter reset:
Press [CLEAR] to reset the counter to "0:00:00".
To playback in slow motion:
Press [PAUSE F] during playback, then press [D].
Press [D] or [E] repeatedly to select the desired
speed.
Automatic rewind:
When a cassette tape is played back or fast forwarded to its
end, the cassette tape will rewind to the beginning, stop
and eject itself.
When you playback a cassette tape recorded in Hi-Fi
stereo:
Press [AUDIO] on the remote control to select Hi-Fi or
MONO for playback sound mode.
• If you have connected a stereo TV to this unit, select "HIFI".
• If you have connected a monaural TV to this unit, select
"MONO".
Type of recorded tape
non Hi-Fi tapes
recorded main
audio program
recorded second
audio program
Note
• Still/slow mode will stop after 5 minutes to prevent
damage to the cassette tape and the video head.
• To return to playback from the picture search/still/
slow mode, press [PLAY B].
Your Selection
HIFI
L-channel
R-channel
Monaural
Monaural
Hi-Fi tapes
recorded in
L
R
Hi-Fi stereo
Hi-Fi tapes
Main audio
Main audio
program
program
Hi-Fi tapes
Second audio
Second audio
program
program
/
]
MONO
Monaural
L+R
Main audio
program
Second audio
program
Advertisement
Table of Contents
