Table of Contents
Advertisement
• When the image compression method of the camera
is "MPEG-4" or when selecting "0.5 ips" or less for
the recording rate, it is necessary to select "10 s" or
longer for the recording duration.
The following recording duration can be set.
• Pre-event recording (PRE-EVENT)
1 - 10 s (in 1-second interval)/20 s/30 s/1 - 10 min
(in 1-minute interval)/20 - 60 min (in 10 minutes
intervals)
• Post-event recording (POST-EVENT)
1 - 10 s (in 1-second interval)/20 s/30 s/1 - 10 min
(in 1-minute interval)/20 - 60 min (in 10-minutes
interval)
MANUAL: Recording will be performed while alarm
signals (site alarm, terminal alarm, command
alarm) are being supplied.
CONTINUE: Recording will not stop until the
[ALARM RESET] button is clicked.
Note:
When "MANUAL" is selected for "DURATION"
(recording duration), recording will be performed for
at least 8 seconds at an event occurrence as long as
the alarm is not canceled.
I SD MEMORY REC
Set the recording rate for the SD memory recording for
each channel.
The following recording rates are available for "SD
MEMORY REC". When OFF is selected, the SD memo-
ry recording will not be performed for the respective
channel.
OFF/0.01 ips/0.02 ips/0.03 ips/0.05 ips/0.1 ips/0.2 ips/
0.3 ips/0.5 ips/1 ips
Notes:
• The recording rate setting for "SD MEMORY REC" is
available only for cameras with the SD memory
recording function and their image compression
method is set to "M-JPEG".
• When the camera in use is WJ-NT304/WJ-NT314,
recording will be performed at 0.2 ips even when
"0.5ips" or "1ips" is selected for the recording rate for
"SD MEMORY REC".
I About the SD memory recording
The SD memory recording is the function of some
Panasonic's cameras that saves images on the SD
memory card on the camera when communication with
the camera failed in the period set for the schedule
recording of this unit.
For example, when "0.1 ips" is selected for the record-
ing rate for "SD MEMORY REC", images will be record-
ed on the SD memory card on the camera if no request
(image inquiry) is made from the unit to the camera in
the period of 10 seconds (equivalent to 0.1 ips*) or more
during the time range set for a schedule.
* The start time of the SD memory recording differs
depending on the set recording rate.
There are two ways to obtain recorded images from the
SD memory card; automatic obtainment by adjusting
time length between schedules and manual obtainment
by clicking the SD memory data obtain button.
When time length between the set schedules is longer
than 30 minutes, images recorded by the SD memory
recording will be obtained automatically. All users will
forcibly be logged out when automatic obtainment
starts.
To obtain SD memory data automatically, set time
length between the schedules longer than 30 minutes.
Refer to the operating instructions (PDF) for how to
obtain images manually.
Important:
• The emergency recording will be performed at the
recording rate set for "SD MEMORY REC" on the
"Emergency REC" window when communication
with the camera failed during the emergency record-
ing.
• The SD memory recording will not be performed if
communication with the camera is not established
even when it reached the start time of the schedule
recording or when the emergency recording is trig-
gered.
• Do not set the recording rate of the SD memory
recording for the same camera with multiple
recorders.
• The recording time of SD memory data will be
recorded based on the clock of the camera. To pre-
vent a time contradiction, match the clocks of the
camera and the WJ-ND300 using the NTP function.
Note:
All images recorded on the SD memory card may
not always be obtained at a time depending on the
time length between the schedules or the total size
of the images. Images failed to obtain can be
obtained automatically next time.
55
Advertisement
Table of Contents
