GEAppliances GTL27 Owner's Manual And Installation Instructions page 28

Table of Contents

Advertisement

Available languages

Available languages

carl for service...
Troubleshooting
Tips
Possible
Causes
What
To Do
Automaticicemaker
Ice maker feeler arm is not
• Move the feeler arm to the ON position.
(on some models)
set ON.
does not work
Water supply turned off or
, See/nsta//ing the water line.
not connected.
Freezer compartment
, Wait 24 hours for the refrigerator to completely
too warm.
cool down.
Piled up cubes in the storage
, Level cubes by hand.
bin cause the icemaker
to shut off.
Ice cubes stuck in icemaker.
. Turn off the icemaker, remove cubes and turn the
(Green power light on
icemaker back on
icemaker
blinking.}
Ice cubes have
Ice storage bin needs cleaning.
• Empty and wash bin. Discard old cubes.
odor/taste
Food transmitting
odor/taste
• Wrap foods well.
to ice cubes.
Interior of refrigerator
_ See Care and cleaning.
needs cleaning.
Slow ice cube freezing
Door left open.
_ Check to see if package is holding door open.
Temperature
control not set
, See About the controls,
cold enough.
, A newly installed refrigerator may take !2-24
hours
to begin making ice cubes.
Moisture forms on
Not unusual during
. Wipe surface dry; then adjust the fresh food control
cabinet surface
periods of high humidity,
setting one number higher and check again in 24 hours.
between the doors
Refrigerator
has odor
Foods transmitting
_ Foods with strong odors should be tightly wrapped.
odor to refrigerator.
• Keep an open box of baking soda in the refrigerator;
replace every three months.
Interior needs cleaning.
_ See Care and cleaning.
Moisture collects inside
Too frequent
or too
(in humid weather, air
long door openings.
carries moisture into
refrigerator
when doors
Open containers
of water
or
, Cover or seal open containers. During a defrost cycle,
are opened)
warm food in the refrigerator,
moisture will be removed from the refrigerator,
but may
return with long or frequent door openings.
Refrigerator
compartment
No power at outlet.
• Replace fuse or reset the breaker.
light does not work
Light bulb burned out or loose.
_ See Replacing the light bulbs.
28

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gth27Gtk27Gtz27

Table of Contents