GEAppliances GTL27 Owner's Manual And Installation Instructions page 16

Installation Instructions
WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS (cont.)
[_] ROUTE AND ATTACH THE WATER
TUBE
Fasten the plastic water tube to the back of the
refrigerator with adhesive-backed fasteners (4),
spacing the fasteners as shown to take up slack in
the tube.
For models with one
temperature control
(refrigerator) only.
For models with two
temperature control (refrigerator
and freezer) only.
Adhesive-backed
fasteners for water tube
[]_] WATER VALVE INSTALLED
Refer to the Water Line Installation Instructions for
connection to the home water supply. After water line
installation is completed, set the feeler arm to ON.
The icemaking cycle will not begin until the
icemaker and freezer compartment reach
operating temperature, then icemaking will begin
automatically,
16