GEAppliances GTL27 Owner's Manual And Installation Instructions page 23

Installation Instructions
I-_ TRANSFER DOOR STOPS
On each door, move the metal door stop from the right
to the left,
Move any screws from the left to the right,
_Door Stop
Left Side
Door Stop
Right Side
r6-1 REVERSING DOOR
HANDLES = TRANSFER
FREEZERDOOR
HANDLE TO THE
RIGHT SIDE OF THE
REFRIGERATOR DOOR
1. Remove the two screws
securing the bottom end of
the handle with a Phillips
screwdriver,
2. Rotate the handle out and
lift off of the mounting
screw on the
freezer door,
3, Remove the
mounting screw
from the surface of
the freezer door,
[-6-] R EVERSING DOOR HANDLES =
TRANSFER FREEZER DOOR HANDLE
TO THE RIGHT SIDE OF THE
REFRIGERATOR DOOR (CONT.)
4. Insert the mounting screw into the surface
of the right side of the
refrigerator door with
a Phillips screwdriver,
5. Align the handle with
the mounting screw,
6, Push the handle down,
7. Secure the top end of
the handle by inserting
two screws and tightening
them with a Phillips
screwdriver,
NOTE: Do not over-tighten,
\
23