Table of Contents
Advertisement
HOW TO USE THE ELLIPTICAL
HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the elliptical has been exposed to
cold temperatures, allow it to warm to room tem-
perature before plugging in the power adapter. If
you do not do this, you may damage the console
displays or other electronic components.
Plug the power
adapter into the
jack underneath
the console. Next,
plug the power
adapter into the
plug adapter.
Then, plug the
plug adapter into
an appropriate
outlet that is prop-
erly installed in
accordance with
all local codes
and ordinances.
Note: The console can also be operated with four
1.5V D batteries (not included); alkaline batteries are
recommended. Locate the battery cover on the back
of the console. Remove the battery cover, insert the
batteries into the battery compartment, and then reat-
tach the battery cover. Make sure to orient the
batteries as shown by the diagrams inside the
battery compartment.
Plug
Adapter
Power Adapter
HOW TO MOVE THE ELLIPTICAL
Due to the size and weight of the elliptical
exerciser, moving it requires two persons. Stand in
front of the elliptical, hold the upright, and place one
foot against one of the front wheels. Pull on the
upright and have a second person lift the handle on
the ramp until the elliptical will roll on the front wheels.
Carefully move the elliptical to the desired location,
and then lower it to the floor.
12
Pull on
upright
Place
your foot
here
Lift here
Advertisement
Table of Contents
