Ii. Hardware Installation; Ii-1. Mounting Kit; Ii-2. Camera - Edimax IC-3116W User Manual

II. Hardware Installation

II-1. Mounting Kit
A stand for your network camera is included in the package contents. The
stand requires some assembly.
1.
Assemble the included camera stand as shown below. The camera stand
can stand by itself or be mounted to a wall:
2.
Secure the network camera to the included camera stand using the
mounting hole on the rear of the camera.
You can also mount the network camera to a tripod using the
mounting hole.
II-2. Camera
Follow the instructions below to ensure your camera is properly connected
and ready for setup.
1.
Use an Ethernet cable to connect the network
camera's LAN port to a router/switch/access point's
LAN port, as shown below.
9