Tr-069 - NetComm Wireless NF15ACV User Manual

TR-069

TR-069 is a protocol for communication between customer premises equipment (CPE) and an Auto Configuration Server (ACS). It
allows the auto configuration server to push requests to the router to perform certain activities, for example, a firmware upgrade.
FIELD
ACS
URL The Auto Configuration Server URL. For example,
User Name The username that the NF15ACV should use when connecting to the ACS.
Password The password that the NF15ACV should use when connecting to the ACS.
When this field is enabled, the NF15ACV will send an Inform RPC to the ACS server at the system startup, and will continue to send it
Periodic Inform periodically at an interval defined in Periodic Inform Interval field; When this field is disabled, the NF15ACV will only send Inform RPC to the
ACS server once at the system startup.
Periodic Inform
Time interval in seconds to send the Inform message.
Interval
Connection Request
User Name The username the remote ACS should use when connecting to the NF15ACV.
Password The password the remote ACS should use when connecting to the NF15ACV.
The path of the device ConnectionRquestURL. The device ConnectionRequestURL should be configured based on the Device_IP, Path and
Path
Port as follows:
Port The port of the device ConnectionRequestURL.
NetComm Wireless VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with VoIP
62
http://10.0.0.1:80
http://Device_IP:Port/Path
DESCRIPTION
or https://10.0.0.1:443
www.netcommwireless.com
UM-00019 v1.0