Sip Advanced - NetComm Wireless NF15ACV User Manual

SIP Advanced

FIELD
SIP Port
Assign the SIP port number of terminal adapter. Its range is 1024 to 65535, default setting is 5060 for FX0 and 5061 for FXS1.
Enter the port for RTP Port number for initial of sending RTP packet. Its range is 1024 to 65535.
Media Port
Default: 9000.
DTMFs are the tones generated by your telephone's keypad. Select the DTMF relay method. ATA supports 4 methods:
SIP INFO
DTMF Relay
RFC 2833
In-band pass through mode
Default: In-band pass through mode.
Specify the Out-band 2833 payload type value.
RFC2833 Payload Type
Default: 96
SIP Info Duration (ms)
Specify the Duration (ms) SIP INFO sounds on the telephony end of the call.
Enable/Disable Call Waiting. Check with your VoIP Provider for Call Waiting support.
Call Waiting
Default: Enable
Enable/Disable Call Waiting Caller ID. Check with your VoIP Provider for Call ID support.
Call Waiting Caller ID
Default: Disable
Enable/Disable Reject Direct IP Call. Check with your VoIP Provider for IP Call check.
Reject Direct IP Call
Default: Disable
NetComm Wireless VDSL/ADSL Dual Band AC1200 WiFi Gigabit Modem Router with VoIP
40
DESCRIPTION
www.netcommwireless.com
UM-00019 v1.0