Precor 9.23 Service Manual page 35

7. Thread the rubber bumpers, removed in step 6, into the replacement lift platform.
8. Install both wheels on the replacement lift platform with the hardware removed in step 5.
9. Set the replacement lift platform in its mounting position and fasten it with the hardware
removed in step 4.
10. Fasten the incline motor's lift tube to the lift platform with the hardware removed in step 3.
11. Ensure that the wheel, lift platform and incline motor bolts are securely tightened.
12. Set the treadmill in its normal upright position and test it per Procedure 3.
20081-118
9.23, 9.27 Treadmill
Page 35