GENERAL SAFETY 9. Do not use in presence of an explosive atmosphere. Always use it in ventilated WARNINGS areas. 10. Place the product on its stand after use and WARNING! Read all safety allow cooling before storage. warnings and all instructions. 11.
Page 3
SYMBOLS To reduce the risk of injury, user must read instruction manual Warning Double insulation Wear eye protection Wear ear protection Wear dust mask RCM approval mark...
Page 4
Nozzle HeAt pRotectIoN oN-off SWItcH/SelectoR SWItcH RubbeR oveRmould GRIp ReductIoN Nozzle * WIde Nozzle * ReflectoR Nozzle * GlASS pRotectIoN Nozzle * ScRApeR * * Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA Voltage 230-240V~50Hz Power input 2000W Temperature/Airflow control I =50 C/300L/min II =350 C/300L/min III= 580 C/500L/min Machine weight 0.8kg Protection class ACCESSORIES Scraper Glass protection nozzle Reduction nozzle Reflector nozzle Wide nozzle We recommend that you purchase your accessories from the same store that sold you the tool. Use good quality accessories marked with a well-known brand name.
3. SettING tHe AIR floW ANd tempeRAtuRe The switch (3) can be set to three blower steps. Suitable air flow and temperature combinations can be selected according to the applications. WX041 Step temperature Airflow 300l/min 300l/min...
The ideal temperature should first be ascertained by performing a test. Therefore, begin with a lower temperature setting. All application examples (except Removing paint from Window frames) can be performed without accessories. However, the use of the recommended accessory part simplifies the work and significantly improves the quality of the results.
10. WeldING plAStIcS Place on the reduction nozzle and the welding shoe. The materials to be welded and the welding rod must be made of the same material (e.g. PVC with PVC). The seam must be clean and grease-free. Heat the welding seam until it becomes tacky.