Standard Pairing Feature - Motorola APX 8000 User Manual

Standard Pairing Feature

Note
Bluetooth tones, Bluetooth menu and
preprogrammed buttons must be
preprogrammed by a qualified radio
technician. Check with your dealer or system
administrator for more information.
Once a COTS headset is paired to your radio,
it is always connected. Therefore the battery
life of the accessory is aligned with the Talk
time power consumption, not the Standby time
consumption.
The Bluetooth Standard Pairing feature enables your
Bluetooth enabled radio to search for other Bluetooth
enabled and discoverable device. Once the device is
discovered, your radio automatically pairs with the
device.
This feature also enables your Bluetooth enabled
radio to be visible to another Bluetooth enabled
device and receive request to pair from other device.
Searching and Pairing the Bluetooth Device
Ensure the Bluetooth on your device is turned on and
is set to Discoverable in order to enable your radio to
detect your device in Bluetooth.
Bluetooth Search in Bluetooth Standard Pairing
method is used to scan for other Bluetooth devices
nearby. It is set to off by default.
The radio only search for HSP devices and Motorola
MCW & OCW accessories. Radio filters out other
profiles.
Press the preprogrammed Bluetooth Inquiry
On/Off button, to enable the Bluetooth Search
feature.
One of the following scenarios occurs:
• If successful, the display shows SRCH ON
followed by SRCH END when the radio is pairing
with a device found. The display shows
<Device Name> PAIRED to indicate pairing is
complete.
• If the feature fails to initiate or the radio fails to
pair with any device, the display shows SRCH
END when the search timer expires without
pairing with any device. Repeat this step.
One of the following scenarios occurs:
• The radio continues to connect to the device. If the
connecting process is successful, the radio
sounds an incremental-pitched tone. The display
73
English