Motorola APX 8000 User Manual page 4

Sending an Emergency Call
1
Press the Emergency button.
2
Press and hold the PTT button. Speak clearly
into the microphone.
3
Release the PTT button to end call.
4
Press and hold Emergency button to exit
emergency.
To exit emergency at any time, press and hold
the Emergency button.
Sending a Silent Emergency Call
1
Press the Emergency button.
2
The display does not change; the LED does
not light up, and there is no tone.
3
Silent emergency continues until you:
Press and hold the Emergency button to exit
emergency state.
OR
Press and release the PTT button to exit the
Silent Emergency Alarm mode and enter
regular dispatch or Emergency Call mode.
To exit emergency at any time, press and hold
the Emergency button.
English
Display Status Icons
U
Blinks when the battery is low.
V The more stripes, the stronger the
signal strength for the current site
(trunking only).
Direct radio to radio communication or
O
connected through a repeater.
On = Direct
Off = Repeater
M
This channel is being monitored.
H L
L = Radio is set at Low power.
OR
H = Radio is set at High power.
i
Scanning a scan list.
Blinking dot = Detects activity on the
Priority-One Channel
j
during scan.
Steady dot = Detects activity on the
Priority-Two Channel
during scan.
k
The vote scan feature is enabled.
On = Secure operation.
m
Off = Clear operation.
Blinking = Receiving an encrypted
voice call.
On steady = View mode
Blinking = Program mode
A
or Basic Zone Bank 1
B
A = Radio is in Zone 1.
or
B = Radio is in Zone 2.
C
C = Radio is in Zone 3.
D
Basic Zone Bank 2
or
E
D = Radio is in Zone 4.
or
E = Radio is in Zone 5.
F
F = Radio is in Zone 6.
Enhanced Zone Bank
A = Contains Zone 1, Zone 2 and Zone
A B
, ,
3,
C
B = Contains Zone 4, Zone 5 and Zone
... ...
6,
x
C = Contains Zone 7, Zone 8 and Zone
or
9,
y
.
.
.
X = Contains Zone 70, Zone 71 and
Zone 72,
Y = Contains Zone 73, Zone 74 and
Zone 75.
b
Bluetooth is ready.
a
Bluetooth is connected to the device.