Motorola APX 8000 User Manual page 89

The display shows Tx inhibit on. You hear a
sequence of short, low‐high tones to indicate
transmission is inhibited.
Pressing PTT triggers the radio sounds a constant
short, low‐pitched tone (reject tone).
Note
The status of the Transmit Inhibit does not
change after the radio powers up.
Disabling Transmit Inhibition
Press the Transmit Inhibit programmable button.
Note
If the user has disabled TX Inhibit via the
softkey and then moves the switch to the
position where TX Inhibit is enabled, the
new value overwrites the menu value.
The display shows Tx inhibit off. You hear a
sequence of short, high‐low tone (Transmit Inhibit
Off tone) to indicate transmission is back to normal
operation.
85
English