Battery Return/ Recycling; Technical Data - Lindsey-west bicycle Pedelec Operating Instruction

Battery return/ recycling

Please do not throw away the battery pack
with other household waste.
Appropriate containers have been provided by
the battery industry as well as the community
collection centres for the proper disposal of bat-
teries. Batteries may also be returned to your lo-
cal dealer.
If you want to send a battery pack, please talk to
your dealer, because Lithium-ion batteries can-
not be shipped without proper labelling. Please
also observe the instructions printed on the un-
derside of the battery.
Operating Instruction Pedelec with Lithium ion battery pack

Technical Data

Drive system
Pedelec/EPAC (Electrical Power Assist Cycle)
Auxiliary cycle drive with 250W front motor, up to
25 km/h, activated via pedal rotary sensor.
Motor
Brushless
250W steady nominal power.
Control
BLDC motor controller with digital programme
control according to Euro standard. 2 assistance
levels and 5 drive modes. The auxiliary drive is
activated automatically on using the pedals and
assists up to 25km/h. The auxiliary drive shuts
down automatically on applying the brake.
Battery
36.3V 10Ah (363Wh) SAMSUNG SDI lithium-
ion battery with 5 LED capacity display, weight
2.3 kg, up to 500 charging cycles or 3 - 4 years
life expectancy under optimum use conditions.
Battery char ger
CC-CV battery charger with 2A charging current.
2
Mileage
Heavily dependent on the selected drive mode,
personal driving style and other factors.
Refer to Chapter "Mileage and its factors"
CC-CV = Constant Current – Constant Voltage: Controlled
1
current strength is first used to charge quickly and the
battery voltage increases. On approaching the maximum
capacity, the current strength is reduced and the remaining
capacity is filled only with exact maximum specified
voltage.
front motor with
45 GB