Limitations On Liability For Defects Of Quality; Disclaimer For Defects Of Quality; Start-Up Of The Pedelec - Lindsey-west bicycle Pedelec Operating Instruction

Limitations on liability for
defects of quality
The liability for defects of quality shall lapse
under the following conditions:
unauthorised or inappropriate use of/damage
to the Pedelecs (traffic accident, fall).
damage which is attributable to normal wear
of parts such as tires, the chain, Bowden
controls and brake shoes.
damage to the paint or chrome due to the
effects of weather, moisture and ambient
conditions (particularly salty air) as well as
aggressive environments containing ammo-
nia.
deficient maintenance of the Pedelec (in de-
viation from the specifications described in
these operating instructions.
repairs which were not performed by a bicy-
cle specialist.
modifications of the drive system which ex-
ceed the framework set forth by the technical
standard specification.
structural modifications to the Pedelec which
deviate from its condition upon delivery. This
particularly applies to the drive battery. Any
modifications lead to the lapse of the war-
ranty!
breakage of the electrical conductor which is
not attributable to design errors.
defects caused by extraneous force.
damage caused by the use of the Pedelec at
competitions.
use of the drive battery in a manner which is
not compliant with the attendant specifica-
tions.
Assertion of liability for defects of quality
In the event of damage, please consult your
bicycle dealer. This is your competent con-
tact person at any time.

Disclaimer for defects of quality

Excluded from liability for defects of quality: Per-
sonal injury or damage to any parts of your Ped-
elec which are not original parts (insofar as legally
permissible).
The performance of repair work neither extends
nor renews the warranty on the product as a
whole.
Operating Instruction Pedelec with Lithium ion battery pack

Start-up of the Pedelec

The following chapters of the user manual of the
Pedelec presume that all basic ergonomic set-
tings and necessary safety checks of your bike
have already been done:
Handle bar and seat have been brought to
the desired position and tightened appropri-
ately.
The wheels have sufficient tyre pressure and
their axle nuts have been tightened too.
The function of the brakes and pedal drive
has been checked.
The lighting system is functioning.
For more information refer to the Chapter
"Adjustments before ride".
Now check the charging state of the battery
by pressing the key on the LED-charging
status display.
Check the charging status of the battery. To do
this, press the button marked "Test". If only some
of the 4 green LEDs light up (F) or only the red
LED (E) lights up, the manufacturer recommends
that you first charge the battery fully.
Activated by
SAMSUNG SDI
E F
TEST
Press the "TEST" button
31 31 GB