Einbau - Lindsey-west bicycle Pedelec Operating Instruction

Einbau

Insert the front wheel and place the torque pro-
tection washers on the hub axle inside the fork.
Left hand side
direction
of travel
Give a few turns to the axle nuts. Align the front
wheel and tighten the axle nuts.
Reconnect the plug-in connector. To help assem-
ble the parts correctly, the arrows on both halves
of the plug-in connectors must point towards one
another!
44
right hand side
Secure the plug-in connectors using the clip on
the fork (see above).
To prevent damage to the electronic system,
only replace the battery in your pedelec at this
point.