Preserving In Winter; Disassembly Of The Front Wheel; Dismantling - Lindsey-west bicycle Pedelec Operating Instruction

Never use high-pressure cleaners to clean
hubs and pedal bearing. This will damage the
components.
Ensure that the tyres and brake rubber do not
come in contact with oil.

Preserving in Winter

The Pedelec should be carefully preserved in
case of long-term storage in the winter months.
Ensure that the Pedelec is parked in a room with
constant temperature. Large temperature fluctu-
ations as well as humidity have a negative effect
on all Chromium and light metal components. To
store it away for winter, check the Pedelec on the
whole for damages to avoid any workshop re-
pairs in spring. Unburden the tyres by hanging
up the Pedelec.
If you do not intend using the Pedelec for longer
periods, pull out the fuse of the battery and store
it in a cool and dry room.
The recommended storage temperature for
the battery is 15°C.
Disassembly
of the front wheel
WARNING:
Please remove the drive battery from the
Pedelec prior to performing any work on the
rear wheel's wiring!
If tyre damage occurs and it is necessary to re-
move the front wheel then follow the instructions
given below:

Dismantling

Remove the drive battery from your pedelec. Cut
the two cable ties that secure the motor plug to
the fork.
Operating Instruction Pedelec with Lithium ion battery pack
Simply pull the plug-in connector apart to open.
Loosen the two hub axle nuts. Now you can re-
move the front wheel as with a conventional bi-
cycle and repair any damage to the tyres, inner
tube or spokes.
43 43 GB