Slant/Fin CHS-85 Instructions Manual page 23

CHS Series
Table 2-13 System Identification & Access Parameters
Parameter Description
Boiler name * Name describing the specific boiler. Limited to 20 characters.
OEM ID Name identifying factory configuration settings; field is read only.
MB1 Modbus Modbus communication address used by the display to identify the attached
controller. No need to change this setting. Range: 1 – 8.
address *
Unique controller I.D. needed when multiple boilers are connected together in a
MB2 Modbus
Lead Lag cascade configuration. Each boiler in a Lead Lag cascade
address *
configuration must have a unique setting. Range: 1 – 8.
Displays the "MB1 Modbus address" setting – do not adjust this setting.
Modbus address
Modbus port used Identifies the Modbus port used by the display to controller; field is read only.
Product ID
Controller type identification; field is read only.
Product family
OS number
Controller model identification; field is read only.
Model name
Software version Controller software version identification; field is read only.
Date code Controller date code; field is read only.
Application
Controller application revision; field is read only.
revision
Safety
Controller safety revision; field is read only.
revision
* = Password protected
Controller and Display
│
Slant Fin Corp.
Factory Settings
e.g.: 110MBH
N/A
1
1
1
MB1
Residential
Hydronic boiler
R7910B1015
N/A
N/A
N/A
N/A
21