Advanced Setup - Slant/Fin CHS-85 Instructions Manual

CHS Series
2.4

Advanced Setup

Advanced Setup
CH Config
DHW Config
Lead Lag Config
System Config
Modulation Config
Delta T Limits
T-rise Limits
Frost Protection Config
Burner Control Timings & Rates
Burner Control Ignition
Table 2-5 Advanced Setup Menu Options
Name
CH Config
DHW Config
Lead Lag Config
System Config
Modulation Config
Delta T Limits
T-rise Limits
Frost Protection Config
Burner Timings & Rates
Burner Control Ignition
Figure 2-7 Advanced Setup (Menu) Screen
Description
Edit Central Heat settings; CH1 heat input.
Edit Domestic Hot Water settings.
Edit Lead-Lag Master and Slave settings; CH2 (LL) heat input.
Edit temperature units, anti-short-cycle time, alarm silence time.
Edit burner modulation settings.
Edit delay time for delta-t limit.
Edit delay time for T-rise limit.
Enable/disable CH, DHW and LL frost protection
Read only, for information only.
Read only, for information only.
Controller and Display
Advanced Setup – menu screen, accessed by
selecting "Advanced Setup" from the "i-Information"
screen, lists all of the configuration parameter groups.
Use the up and down (▲▼) buttons to navigate the
menu options; when the desired option is highlighted
select by pressing the "OK" button.
Login – adjustment of many of the advanced settings
will prompt the user to login.
│
Slant Fin Corp.
Reference:
Section 2.4.1
Section 2.4.2
Section 2.4.3
Section 2.4.4
Section 2.4.5
Section 2.4.6
Section 2.4.6
Section 2.4.7
Section 2.4.8
Section 2.4.9
9