Slant/Fin INTREPID TRDV Series Installation And Operating Instructions Manual
Slant/Fin INTREPID TRDV Series Installation And Operating Instructions Manual

Slant/Fin INTREPID TRDV Series Installation And Operating Instructions Manual

Direct vent oil-fired water boiler

Advertisement

Quick Links

INTREPID
TRDV Series
DIRECT VENT OIL-FIRED WATER BOILER/NO. 2 OIL
READ AND SAVE THESE INSTRUCTIONS FOR REFERENCE.
SAFETY WARNING:
KEEP BOILER AREA CLEAR AND FREE FROM
COMBUSTIBLE
MATERIALS,
OTHER
FLAMMABLE
FAILURE
TO
ADHERE
WARNING, MAY RESULT IN PERSONAL INJURY
OR DEATH AND PROPERTY DAMAGE.
CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PAGE
Ratings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installation Requirements:
Boiler Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Vent Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Vent Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Installing Water trim . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Piping for Tankless heater . . . . . . . . . . . . . . . . . . . . . . . .5
Installing Burner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Oil Supply Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Wiring the Boiler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Operating Instructions:
Precautions Before Starting . . . . . . . . . . . . . . . . . . . . . .6
Start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Cleaning and Filling New Water Boiler . . . . . . . . . . . . . .6
Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-9
Burner Data:
Riello . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Heatwise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Care and Maintenance:
Extended Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Freezing Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Oil Burner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
General Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . .13
THIS BOILER OPERATES WITH POSITIVE PRESSURE IN
THE FLUE AND OVER FIRE, ALL SEALS MUST BE IN
PLACE WHEN OPERATING THE BOILER. ALL VENTING
MUST BE INSTALLED AND SEALED ACCORDING TO THE
VENT MANUFACTURER'S INSTRUCTIONS.
CAUTION
The information in this manual must be followed exactly
to avoid personal injury, property damage or loss of life.
INSTALLATION AND OPERATING INSTRUCTIONS
GASOLINE
AND
VAPORS
AND
LIQUIDS.
TO
ABOVE
SAFETY
SERVICE COMPANY
Name ______________________________________
Address ____________________________________
__________________________________________
Telephone __________________________________
Model # ____________________________________
Serial # ____________________________________
IMPORTANT: The installation of this equipment must conform
to the requirements of the authority having jurisdiction or, in
the absence of such requirements, to the Installation of Oil
Burning Equipment, ANSI/NFPA 31, latest edition, and to the
National Electrical Code ANSI/NFPA 70, latest edition. The
installation must also conform to the additional requirements in
this Slant/Fin Instruction Manual. Where there is any differ-
ence, the more stringent requirement shall govern.
In addition, where required by the authority having jurisdiction,
the installation must conform to American Society of
Mechanical Engineers Safety Code for Controls and Safety
Devices for Automatically Fired Boilers, No. CSD-1, latest
edition.
THIS MANUAL MUST BE LEFT WITH OWNER AND
SHOULD BE HUNG ON OR ADJACENT TO THE
BOILER FOR REFERENCE.
IMPORTANT: This boiler must be installed by a trained,
experienced, service technician, licensed for the installation
and servicing of oil burning equipment or otherwise qualified by
the authorities having jurisdiction over the installation.
Publication No. TRDV-40
P/N 432750 Printed in U.S.A. 308

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INTREPID TRDV Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Slant/Fin INTREPID TRDV Series

  • Page 1: Table Of Contents

    Heatwise ........12 this Slant/Fin Instruction Manual. Where there is any differ- Care and Maintenance: ence, the more stringent requirement shall govern.
  • Page 2: Ratings And Dimensions

    INTREPID TRDV Tappings and Openings Tapping Loc. Water Boiler ⁄ ” supply ⁄ ” air vent or expansion tank ⁄ ” water relief valve ⁄ ” tankless inlet ⁄ ” tankless outlet ⁄ ” pressure temp. gauge ⁄ ” high limit, hi/lo or combination control ⁄...
  • Page 3: Boiler Location

    B. Place metal strapping every 36” to support vent pipe and prevent it from sagging. C. Maximum wall thickness is 14”. Contact Slant/Fin Corp. for recommenda tions in case of thicker wall. D. Gases will form white plume in winter. Plume could obstruct window view.
  • Page 4 INTREPID TRDV...
  • Page 5: Piping For Tankless Heater

    INTREPID TRDV II. AIR CONTROL SYSTEMS A. DIAPHRAGM-TYPE COMPRESSION TANKS are used to control system pressure in an AIR ELIMINATING SYSTEM: an automatic air vent is used to REMOVE air from the system water. See figure 4. If system pressure needs further control, add an additional tank or install a larger capacity tank.
  • Page 6: Oil Supply Piping

    A. Prepare a boil-out solution of sodium hydroxide (caustic soda) or essary, especially at low fuel oil flow rates (small nozzle sizes), to pre- tri-sodium phosphate. vent nozzle plugging. See Slant/Fin publication on one-pipe and two- NOTE: Use caution in handling chemicals. Caustic soda is pipe fuel oil systems.
  • Page 7: Wiring Diagrams

    INTREPID TRDV See page 8 for other Primaries. SEE: “Adjusting Settings” & “Error Codes” for L7224C & L7248L on page 8...
  • Page 8 INTREPID TRDV FOR L7224C OR L7248L °F or °C. Pressing the I button again (on L7224 models) will display the ADJUSTING SETTINGS Low Limit (LL) followed by a three-digit number and the corresponding To discourage unauthorized changing of Aquastat settings, a procedure degree designator.
  • Page 9 INTREPID TRDV Basic Module Wiring (less circulator)
  • Page 10: Riello

    INTREPID TRDV RIELLO BURNER D T – BURNER MODEL BF-5 Nozzles Riello Oil Pump “A” Approx. Firing Rate No. 2 Oil Burner Size Angle & Pressure Approx. Air Band Model L/Hr (GPH) Type Mfg. Setting Head Opening Boiler Model TRDV-30-0.85 BF-5 0.85 3.21...
  • Page 11 INTREPID TRDV SETTING THE AIR DAMPER ADJUSTMENT (see figure 10 & picture 2) 1. The initial air damper setting is made by turning screw (2) until the top edge of the air damper (3) is aligned with the number according to the burner setup chart. 2.
  • Page 12: Heatwise

    INTREPID TRDV HE T WISE BURNER D T – BURNER MODEL PK1 Nozzles Heatwise Oil Pump “A” Approx. Firing Rate No. 2 Oil Burner Size Angle & Pressure Approx. Air Band Model L/Hr (GPH) Type Mfg. Setting Head Opening Boiler Model TRDV-30-0.85 Pk 1A 0.85...
  • Page 13: Extended Shutdown

    INTREPID TRDV C RE ND M INTEN NCE C. If boiler room is damp, provide ventilation. CAUTION: ALWAYS KEEP THE OIL SUPPLY VALVE SHUT OFF IF THE BURNER IS SHUT DOWN FOR AN EXTENDED PERIOD OF CAUTION: DO NOT ATTEMPT TO START THE BURNER WHEN TIME.
  • Page 14 INTREPID TRDV Notes:...
  • Page 15 INTREPID TRDV Notes:...
  • Page 16 © Copyright 2011 SLANT/FIN CORPORATION, Greenvale, N.Y. 11548 • Phone: (516) 484-2600 Canada: Slant/Fin Mississauga, Ontario FAX: (516) 484-5921 • LTD/LTEE, www.slantfin.com...

Table of Contents