Audio Input - Magnadyne RV5090 Operation And Installation Manual

AUX Audio Input
Selecting the Audio Source:
Note: The RV5090 does not control the device, it
just allows the audio/video to be played through
the system.
Front Audio Input:
Insert the 3.5mm jack from the audio device
into the AUX input socket on the front of the
housing. Press the AUX button until "AUX F"
appears in the display. Refer to the audio
device's owner's manual for proper operation.
Rear Audio Input:
To select the rear Audio play source, press
the AUX button until "AUX R" appears in the
display. Refer to the audio device's owners
manual for proper operation.
Note: The volume setting of the connected audio
device has an effect on the overall loudness of
the RV5090.
Headphone Output
Plugging in Headphone:
Insert a 3.5mm headphone jack into the
Headphone Output socket. Use the Volume knob
on the headphone to adjust the audio level.
Note: To make it so the sound only can be heard
through the headphones press the A, B, C buttons
once to deselected speaker sets A, B and C. The
LED indicators for each speaker set will be off.
22