Music Disc Operation - Magnadyne RV5090 Operation And Installation Manual

Music Disc Operation

General Operations:
Gently insert the disc into the slot with the label
side up. The unit will automatically load the disc.
Note: If a disc does not auto-load DO NOT
FORCE into the slot, as you may already have a
disc loaded.
Music Track Selection:
Press the button to select a lower track.
Press the button to select a higher track.
The track number will appear in the display.
Tracks can also be selected by using the remote
control. Press the track selection number button
that corresponds to the track you want to play.
For example: If you want to play track 8, press
button 8. Track 8 will start playing and "8" will
appear in the display.
If you want to play track 12, press button 10+,
followed immediately by button 2. Track 12 will
start playing and "12" will appear in the display.
Pausing the Disc:
Press the button to pause the disc and "PAUSE"
will appear in the display. Press it again to resume
play and "PAUSE" will disappear from the display.
Note: You can also press the
control.
on the remote
Label Side Up
Track Number
DISP
REPEAT RANDOM ZOOM SLOW
1 2
EQ
4 5
BAND
AS/PS
7 8
ELAPSE
10 +
10/0
AUDIO
SUB.TT
POWER EJECT
MENU MODE
VOL
SETUP
TONE
VOL
VOL
ENTER
3
6
9
13