Transporting / Storage - Evinrude E-TEC 90 H.O. Original Instructions Manual

Using Your Evinrude E-TEC Outboard
To disengage bracket —
ly. Return the trailering bracket to its stowed
position. Lower the outboard to its vertical po-
sition.
42
Tilt the outboard ful-
DR5074

TRANSPORTING / STORAGE

If the outboard is removed from the boat for
transportation or storage, you MUST seal the
oil and fuel lines on the boat and on the out-
board to prevent leaks and prevent contami-
nants from entering the oil or fuel system.
A WARNING
A small amount of fuel may be released
when the fuel line is disconnected.
Always wipe off any fuel spillage.
Gasoline is extremely flammable and
highly explosive under certain condi-
tions. Do not allow disconnected fuel
hoses to leak fuel.
Use caution when working on the fuel
system. Wear safety glasses and work in
a well ventilated area. Extinguish all
smoking materials and make certain no
open flames or ignition sources exist.
Always wipe off any fuel spillage.
The oiling system must be primed before re-
using the outboard. Refer to Priming the Oil
System on page 19.