Front Wheel Toe-In Adjustment - Toro 400XT Series Service Manual

CHASSIS
2. Push the front of the tires out to remove normal
looseness in the linkage (Figure 5).
Figure 5
3. Measure the distance between both the front rims
at spindle level, in front and rear of the wheels.
You can also measure between the tread mold
marks if the tires are new (Figure 6).
Figure 6
2 - 2
4. The front measurement should be 1/8" to ¼"
(3mm to 6mm) less than the rear measurement
(Figure 7). If needed, follow the adjustment
procedure.
MVC-747

Front Wheel Toe-in Adjustment

1. Remove the tie rod from one steering arm.
2. Loosen the jam nut securing the ball joint to the
steering rod. Rotate the ball joint one turn:
clockwise to increase toe-in; counterclockwise to
decrease toe-in (Figure 8).
IMPORTANT: If more than one turn is required
to meet specifications, alternate between the
right and left steering rods to maintain
steering wheel alignment.
MVC-749
Figure 7
Figure 8
400XT Series Tractor Service Manual
MVC-752
MVC-095X