Dell S520 User Manual page 47

After the IP Address, Subnet Mask, Gateway, and DNS is set
3
up, select Store and press
If you select Store without pressing the Enter button, the
4
system will keep the original settings.
R —Press
ESET
W S
IRELESS ETTINGS
wireless settings menu provides the following options:
W —If your projector wireless function is enabled, this option
IRELESS
will be listed on the screen as Connected.
DHCP S
ERVER
S IP A
TART
address of the DHCP server to the projector connected to the wireless.
E IP A
ND DDRESS
of the DHCP server to the projector connected to the wireless.
S M
UBNET
G —Check the Gateway address with your network/system
ATEWAY
administrator if you configure it manually.
DNS—Check the DNS Server IP address with your network/system
administrator if you configure it manually.
S —Press
TORE
settings.
NOTE:
Use
1
Gateway, DNS, and Store.
Press the
2
Gateway, or DNS to set the value. (The selected option is
highlighted in blue)
a
to reset network configuration.
—
Select and press
—Allows you to enable DHCP server of the wireless.
—Automatically or manually assigns the Start IP
DDRESS
—Automatically or manually assigns the End IP address
—Configure the Subnet Mask of the wireless connection.
ASK
to save the changes made in wireless configuration
and
button to select IP Address, Subnet Mask,
button to enter IP Address, Subnet Mask,
Use and
button to store the settings.
to activate wireless settings. The
button to select the option.
Using Your Projector 47