Dell S520 User Manual page 41

settings. The display settings menu provides the following options:
H
ORIZONTAL
move the image left.
V P
ERTICAL
the image down.
F
REQUENCY
match the frequency of your computer's graphics card. If you see a
vertical flickering wave, use the Frequency control to minimize the
bars. This is a coarse adjustment.
T —Synchronize the phase of the display signal with the
RACKING
graphic card. If you experience an unstable or flickering image, use
Tracking to correct it. This is a fine adjustment.
A R
SPECT ATIO
image appears. Options are: Origin, 16:10, and 4:3.
•Origin — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
•16:10 — The input source scales to fit the width of the screen to
project a 16:10 screen image.
•4:3 — The input source scales to fit the screen and projects a 4:3
image.
Z —Press
OOM
P —Press
OSITION
—Press
OSITION
—Allows you to change the display data clock frequency to
—Allows you to select the aspect ratio to adjust how the
and to zoom and view the image.
Z N
OOM
Zoom Navigation menu.
Use
screen.
to move the image right and
to move the image up and
Adjust the image scale by pressing
and press
control only.
—
Press
AVIGATION
to navigate the projection
Using Your Projector
to move
to view on your remote
to activate the
to
or
41