Fire And Explosion Hazards; Before Putting Into Operation; During Operation; Maintenance And Repairs - Alto KC 1000 E Safety Notes

The conveying of persons
is inadmissible.
Before the starting of the
motor switch off the
wheel drive (suction fan
and brushing roller
always run together with
it).
The filling of fuel tanks
may only be carried out
when the motor is
switched off. Smoking
and the use of naked
flames are prohibited
during the filling of fuel
tanks and when working
on or near components
containing fuel.
Essential protection from
accidents is provided by
the faultless maintenance
of the machine.
Oils, fuels and filter are
to be disposed of in an
orderly manner.
HEALTH-HAZARD
DUSTS *)
The brushing vacuum
cleaner is not suitable for
the processing of sur-
faces from which
health-hazard dusts and
liquids are released.
6
FIRE AND EXPLOSION
HAZARDS
The following materials
must not be swept up:
- hot materials
(glowing cigarettes,
hot ash etc.)
- inflammable, explosi-
ve, aggressive liquids
(e.g. petrol, solvents,
acids, alkalis etc.)
- inflammable, explosi-
ve dusts
(e.g. magnesium,
aluminium dust etc.) *)
BEFORE PUTTING INTO
OPERATION
Before putting it into
operation check the
brushing vacuum cleaner
to ensure that it is in the
state required by the
instructions. The socket
plug and the couplings
of the battery
connection leads must
be at least protected
from splash water.
Check battery connec-
tion leads and/or ignition
cables regularly for
damage or signs of
ageing. Operate the
brushing vacuum cleaner
only with intact battery
leads and ignition
cables.
*) Health-hazard dusts are dusts of dust classes L,Mand H.
Only vacuum with
undamaged cassette
filter.

DURING OPERATION

Ensure sufficient air
circulation. Do not cover
machine or operate it in
inadequately ventilated
rooms!
During the work make
allowances for the
braking distance of the
machine.
Never work on a gradient
which is larger than the
maximum permissible
gradient stated on the
rating plate.
The machine is suitable
for operation outdoors.
MAINTENANCE AND
REPAIRS
WARNING!
Before carrying out
cleaning and mainte-
nance work on the
brushing vacuum
cleaner
switch off the motor
as a matter of prin-
ciple and remove the
sparking plugs and
switch off the key-
operated switch,
remove the key and
the battery plugs.