Ac On - Outback Power Systems GRID-INTERACTIVE GTFX Programing Manual

BYPASS
Note: If you are using the FW-X240 Auto Transformer for step-up functioning, turn on its breaker now.
Otherwise, go to the next step.
Verify the AC voltage output through the MATE following path:
PATH
MAIN-------
12.15:30p
SUM STATUS SETUP ADV FX CC DC MAIN MODES METER BATT PG2
15
OUTPUT INPUT
SETUP------------ STATUS/FX/PAGE1----------
choose device: choose category:

aC On

• With the programming completed, turn the AC
output breakers ON with the AC BYPASS on the AC
breaker panel switched to NORMAL.
Float P00
inv 0.0Kw zer 0.0kw
chg 0.0kw buy 0.0kw
DOWN STATUS PORT
STATUS/FX/METER--P00
output 117 vac
voltage
DOWN UP TOP PORT