Table of Contents
Advertisement
b. Squeeze all of the contents of the thermal grease packet (provided with the kit) on to the microprocessor thermal-cooling assembly.
2. Align the microprocessor thermal-cooling assembly in place on the
3. Connect the fan power cable to the system board.
4. Tighten the four captive screws, labeled "1" through "4," in consecutive order.
5. Replace the
palm rest
and then replace the
6. Replace the
button board
and the
7. Replace the keyboard.
8. Replace the
hinge
cover.
Back to Contents Page
system
display
panel.
EMI
shield.
board.
Advertisement
Table of Contents
